Precautions for using automatic sealing machine

The correct way to use an automatic sealer:

1. There is always an amount of butter (molybdenum disulfide grease) present in the gearbox of an automatic canning machine.

2. This automatic sealer requires a fuel refill when replacing the butter nozzle made in the United States.

3. Before installing needle roller bearings and cylindrical roller bearing units, each roller ring should be coated with a smooth layer of lubricating oil.

4. Oil seals should be installed on both sides of each radial bearing (head end bearing numbered 6).

5. For tanks of different diameters, turntables and indents with different positioning arcs should be used.

6. The cylindrical pin φ8 with part number 24# should be pressed in and then the gap should be adjusted to be in the range of d = 0.03 - 0.05 using a thin spring steel sheet z (after grinding on a surface grinder, its thickness d = 0.5 ± 0.02) and always refueled and ground.

7. Part No. 41# Planar bearings should also be lubricated during use.

8. The shape and layout of the sealing rolls and rollers are for reference only.

9. Turntable materials South Korea uses hard plastics, while the world generally uses phenolic resin or aluminum alloy plates. The materials do not attract magnetism, the second material is easy to process and the precision remains good, and the third material does not deform. Please choose wisely.

11. The automation, cutting, positioning of the appliances and the linkage of the cylinders enable the control of the movement effect, a process designed by electrical engineers.

12. In the case of automatic canning machines, it is necessary to add a motorless conveyor belt for emptying the tanks at the feed end, which is approximately 2 mm in length.