Storage form of sealing machine

Can sealing machine
(1) Storage
When equipped with can sealing machine equipment, in order to ensure the transmission cooperation of parts, some parts need to be equipped with double sets of spare parts, such as high-precision ball screw pairs, spiral bevel gears, worm gear pairs, boring bars, etc. In order to shorten the downtime of equipment maintenance, double sets of common spare parts are always available, such as lathe start-stop feed screws and nuts.
(2) Product Storage
In the equipment maintenance of energy equipment —— can sealer, some spare parts remain in their original size, such as friction plates, gears, spline shafts, etc., and can be (or purchased) for finished product storage to extend the application life of specific components. It is sometimes possible to plan ahead, consciously use some quality-related components for sharing, and store finished products by matching component grade. Take the piston and cylinder as an example: divide the piston into two to three different matching grades according to the piston strength, and then store the finished piston rings in grades according to the grades. When in use, the piston rings can be optionally repaired in the cylinder.
(3) Finished product storage
Some maintenance parts of equipment sealing machines need to be reserved, and the size chain must be disassembled before the machine can be repaired. For example, bearings and bushings can be stored in batches or in a roughing state; sliding bearing quenched shaft parts, the journals are not stored as semi-finished products after grinding and quenching.
Can sealing machine的备件按 终产品制造时需考虑的加工尺寸存储。存储半成品既能缩短因零件生产导致的长期停机时间，又能筛选出可提前替换的材料或检测孔洞裂纹。