Operating process of sealing machine and its characteristics

Automatic Can Sealing Machine This device is particularly suitable for the back cover of specially shaped gasoline drums. The entire process of the roll sealing of the equipment is done automatically by the machine. The operator simply places and removes the workpiece, pressing the pedal once at a time. During the roll-sealing process, the tank body does not move and is very safe to use. Easy operation and low noise. The new rotary automatic sealer is a machine for automatic sealing of glass jars. It uses an electromagnetic friction clutch mounted on the shaft sleeve, which automatically adjusts the tightening force through a control circuit. The closure shaft can be automatically lowered and raised to clamp and release the cap. The machine not only precisely controls the sealing torque of the bottle cap, but also keeps abreast of changes in the seal through a torque meter installed on the panel. The canning machine cannot keep track of changes in canning torque at any time, which is troublesome to adjust and has a low production qualification rate.
Automatic capping machine This machine can not only accurately control the capping torque of bottle caps, but also keep track of changes in the capping process through a torque meter installed on the panel, which overcomes the defect that ordinary capping machines cannot keep track of capping changes at all times. It solves the problems of ordinary capping machines being unable to keep track of changes in can capping torque, cumbersome adjustments, and low production qualification rates. The working parameters can be easily designed and changed according to the capping requirements of different round cans through the touch screen. A single fold-seam capping is performed in the same manner as the stitching operation of the secondary and secondary capping wheels, even if the flanging edge of the can body and the hook edge of the can lid overlap and bend, and then compress and seal to form a tight tinned layer. In terms of stitching, the capping wheel bends and tightly hooks the flange of the can body and the hook edge of the can lid in the case of overlap, while the second capping wheel applies pressure after the above-mentioned initial stitching is formed. Seal well.
The automatic sealing machine is not only beautiful in appearance, compact in structure, good in synchronization, stable in machine operation, stable in vacuum and nitrogen filling values, and highly automated. The operating system of the whole machine is controlled by PLC. Main working parameters can be operated on the touch screen. The production process is carried out in a sealed room, which meets the requirements of food production without pollution and hygiene.