Filling and sealing of sealing machine is the core technology

Can Sealing Machine For filling and sealing of cans designed as one piece, the power of the filling system is provided by the sealing system to ensure synchronization and coordination of the two. It uses the world's most advanced mechanical, electrical and pneumatic control technologies and adopts the principle of isobaric filling. Fast filling speed, stable liquid level after filling, small material loss. Good sealing quality. The whole machine runs smoothly. It has the characteristics of beautiful appearance, easy operation and maintenance, and variable frequency adjustment of production speed. Remote control system can be configured according to customer needs. Ideal equipment for medium-sized beer and beverage factories. It can seal round iron, aluminum or plastic cans of various specifications and has vacuum function. Suitable for the production of fruit jars, beverage jars, plastic jars, etc.; the machine operates stably, has high vacuum, and the sealing quality meets the standards. It also has other characteristics. Its key components are machined by high-precision equipment, which improves machining accuracy and ensures the stability of the entire machine.
There are two methods of crimping and sealing: ①the tank body rotates with the pressure head; ②the tank body is fixed between the pressure head and the support plate and cannot rotate. The latter type of sealer is more suitable for sealing juicy cans. Because the can body does not rotate, the liquid in the can is prevented from splashing out under the action of centrifugal force, thereby avoiding the problem of insufficient net weight of the product; the sealed can enters the sealing chamber of the sealing machine, and the air in the can is extracted by a pipe connected to a vacuum pump and then sealed again.
The machine automatically seals when there are jars with lids, stops automatically when there are jars without lids, stops automatically when overloaded, fails to start when there is insufficient vacuum, and also stops automatically. It is produced at a rate of 50 jars per minute. Suitable for special shaped jars with a large diagonal of 130 mm and a tank height of 22 to 96 mm. This can sealing machine has the advantages of simple structure, easy maintenance and operation, small size and light weight. Domestic production of aluminum cans began in the 1980s. After more than 20 years of development, the production capacity has been formed. There are 26 can production lines with an annual production capacity of over 11 billion. In 1996, 5 billion cans were sold in China. In 1998 alone, national consumption of cans was approximately 6 billion. In 2004, the total national demand for tanks reached approximately 8 billion, consuming approximately 180,000 tons of aluminum. However, looking at current consumption of aluminum cans, the per capita consumption is 6. That's a significant difference from the 400 per capita in the United States, so as the economy grows and people's consumption levels increase, the amount of aluminum used in canning machines will increase further.