CN
EN
In use Automatic sealing machine At this time, the user needs to prepare a high-position large tank with a valve and output connector at the bottom. The bottom of the large tank should be higher than the automatic sealing machine according to the position, and the hose is connected to the top valve of the machine. Connect the motor of the machine to the 220v power switch (the electrical switch is provided by the user) and connect the body shell to the ground wire.
After the automatic sealing machine is installed , First check whether there is any looseness in each part and whether the top valve is dexterously up and down. After checking everything is normal, open the empty car for trial operation. The rotation direction of the whole machine is set to rotate clockwise before leaving the factory. Adjust the height of the bottle through the lifting mechanism. The filling level is reached by adjusting the length of the filling tube.
The transmission part of the automatic can sealing machine is driven by a motor through a pulley and a triangle belt to drive the reducer gear and the large gear of the can sealing machine to rotate, thereby driving the whole machine to rotate. Maintenance and maintenance In order to make the equipment have the best reliability and longevity, regular maintenance is necessary to keep the equipment in the best condition.
It should be stopped during repair and maintenance. The automatic sealing machine is transported to the site to check whether there are damages and missing parts in each part. The state is generally rotary, with 14-18 filling nozzles, and the output is 1500-3000 bottles/hour (calculated by 750ml) , The siphon filling machine is a semi-automatic filling, manual loading and unloading of bottles, automatic filling, and a bottle washer, a bottle washer, a light inspection, a stopper, a rubber cap heat shrinking machine, a sealing machine, etc. to form an assembly line. Negative pressure filling machine has rotary type and linear type. Wine generally uses rotary type, with 12, 16, 18, 24, 32 filling nozzles, and the output is generally 1500-6000 bottles/hour (calculated by 750ml). Negative pressure filling machines are generally compatible with flip-washing machines, light inspections, automatic stoppers, automatic rubber cap heat shrinking machines, automatic labeling machines, inkjet printers, carton sealing machines and other supporting applications. Turn-over bottle washer and automatic stopper are made into automatic sealing machine to improve the equipment level.
