The simple sealing machine is composed of motor, belt pulley, main shaft, locking pad, column, lifting table, right wheel, camshaft and cam of gear box, gear, rack and so on. Leaking from the end of the cylinder of the automatic sealing machine, check the material that can be damaged in the piston seal ring of the paste filling machine, and replace it if it is damaged. The confirmed piston and piston rod are fixed. In the cylinder piston aluminum support center.

Clean the dust and dirt in the vacuum pump cavity twice a year, clean the fan cover, the wind wheel, through the style door, the heat sink (compressed air purification). Once a year, replace the exhaust filter, clean or replace the air filter (compressed air purification). Change the vacuum pump oil and oil filter every 500 to 2000 hours.

Simple can sealing machine, automatic sealing machine for easy-folding plastic bottles, the sealing device of the sealing machine can carry out the reverse filling of the plastic bottle, and then send it to the conveyor belt to fill the bottle body and seal the bottom cap. Because the excess liquid remaining in the sealed area will seriously affect the quality or seal leakage, in order to ensure the sealing quality, the automatic sealing machine makes the filling head and the filling level higher. Extracting and controlling the one-way valve type material through the cylinder to drive the flow of the piston material, control the stroke of the cylinder with the reed switch, and adjust the filling volume.