How to adjust can sealer?

Talking about the seven adjustment steps of can sealing machine:

1. Motor power: 0.37kw 380/220v 50hz
2. Capacity efficiency: 1200 bottles/hour

3. Bottle mouth specifications: Polyester plastic bottle diameter 26mm

4. Bottle mouth diameter: polyester plastic bottle diameter 26—48mm. Special bottle type can be customized. Glass bottle can be processed according to sample bottle cap

5. Applicable bottle height: 160-320mm, special bottle shape can be customized, glass bottle can be processed according to bottle shape

6. Rotation direction: clockwise

7. Size: 600*400*1470mm Bracket positioning plate adjustment: The head is lowered to the bottom dead center through the click switch. At this time, the distance between the bottom surface of the head and the top surface of the bracket positioning plate should be maintained at 3-5 mm, and it can move upward. Open the head cap, put in the glass bottle, close the lid plate, the head automatically presses down and tightens the bottle cap, take out the bottle and check the tightness of the lid: if it is too loose, move the tray up; if it is too tight, move the tray down until the tightness is moderate.